Pemanfaatan Fly Ash dan Bottom Ash PLTU Rembang Untuk Pembuatan Beton Menggunakan Semen PPC
DOI:
https://doi.org/10.56911/jik.v3i1.86Kata Kunci:
fly ash, bottom ash, high strength concrete, concrete absorptionAbstrak
The research aims to reduce the amount of coal burning waste of fly ash and bottom ash PLTU Rembang as a substitution of cement and sand in the production of quality concrete K-225 and waterproof using Portland Pozzolan cement. The method was experimented in the laboratory by making 50 samples of 15 x 15 x 15 cm3 test objects for 28 days, 60 days, and water absorption tests. The test objecte was made in 5 variations: normal concrete (without substitution) and 20% bottom ash substitution concrete and fly ash mixture 0%, 5%, 10%, 15%. Strong K-225 pressure occurs at the age of 60 days on bottom ash substituted concrete 20% with fly ash 0%, 5% 10% and 15% respectively of 245 kg/cm2, 254,67 kg/cm2, 250,67 kg/cm2, dan 250,67 kg/cm2. Water absorption of concrete at 28 days of ashes substitution was less than 20% and ashes flew below 0% and 5%, 10% 15% resulted in 4.85%, 5.17%, 5.05%, and 5.18%. The results of the research showed that the concrete made meets the K-225 quality and better absorption than normal concrete.
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Copyright Notice
An author who publishes in the Jurnal Inovasi Konstruksi agrees to the following terms:
- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.