Pengukuran Produktivitas Tenaga Kerja Pemasangan Plafon U-Baffle menggunakan Metode Time Study dan Productivity Rating

Penulis

DOI:

https://doi.org/10.56911/jik.v2i2.75

Kata Kunci:

Manpower productivity measurement, U-baffle plafond, time study, productivity rating

Abstrak

This study aims to determine the productivity values and Labor Utilization Rate (LUR) of labor in the U-Baffle ceiling installation work. The research sample covers an area of 505 m2. Data normality is controlled using the Upper Control Limit (UCL) and Lower Control Limit (LCL). The results indicate that the productivity value for the installation of the hanging rod is 107.38 m2/day, stringer 138.21 m2/day, hollow (2.5 m) 125.41 m2/day, hollow (4m) 97.08 m2/day, and U-Baffle panel 525.71 m2/day. The coefficient values for craftsmen and workers for frame installation are 0.0268 OH, and for ceiling cover installation are 0.019 OH. The LUR values for craftsmen in the morning and afternoon are 38.48% and 39.2%, respectively. Meanwhile, the LUR values for workers are 42.98% in the morning and 47.11% in the afternoon. From these results, it is concluded that the labor force is not working efficiently, and there is still room for performance improvement, as indicated by LUR values being less than 50%.

Unduhan

Diterbitkan

2023-12-27

Terbitan

Vol 2 No 2 (2023): Oktober

Bagian

Artikel

Lisensi

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Copyright Notice

An author who publishes in the Jurnal Inovasi Konstruksi agrees to the following terms:

  • Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
  • Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
  • Author is  permitted and encouraged to post his/her  work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).

Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.