Analisis Struktur Bawah Permukaan Tanah Menggunakan Metode Geolistrik 3D Studi Kasus: Area Kampus Universitas Pertahanan Republik Indonesia, IPSC, Bogor
Abstract
Subsurface conditions are very important as a basis for infrastructure development so that the right actions can
be taken. One method to determine subsurface conditions is the geophysical method, namely the geoelectric
method. The geoelectric method is a geophysical method that utilizes the resistivity value of the material. The
purpose of this study is to obtain a 3D model of subsurface conditions based on their resistivity values. Data
collection uses MAE X612-EM geoelectric equipment and processing uses ERTLab software. The area studied is
70m long with 10m wide, the depth obtained is 11.6m. The 3D section results show a resistivity value of 2.96 Ωm
– 9 Ωm from the model obtained. The surface is dominated by hard material marked in red on the 3D model. A
zone with a low resistivity value distribution of 2.96 Ωm was obtained in the middle at a distance of 17 -40m at a
depth of 5.56m which is suspected to be a water trap. In the 3D model, it is assumed to get 3 layers, which are
marked in red. green and blue which represent the respective resistivity values.
Keywords: Resistivity, geoelectric,water,subsurfaces
Keywords
Full Text:
PDFDOI: https://doi.org/10.56911/jik.v3i1.88
Refbacks
Office:
Politeknik Pekerjaan Umum
Jalan Soekarno Hatta Nomor 100 Gayamsari Semarang, 50166
Jalan Prof. Soedarto, SH Tembalang Semarang 50275
E-mail: redaksi.jurnal@politeknikpu.ac.id
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License